The University of Sydney
School of Aerospace, Mechanical
& Mechatronic Engineering
Rheology Group Publication list
1999 Research Output
Bilston LE (1999) Lessons from a
problem-based learning class in first year engineering statics, 2nd
Asia-Pacific Forum on Engineering & Technology Education, Sydney, 157-161
Dou H, *Mizuki S (1999) Static pressure
recovery of compressible flow in radial vaneless diffusers, International Gas Turbine
Congress 1999, Kobe, Japan, 547-554
Fan X, Phan-Thien N, Tanner RI, Zheng R
(1999) Direct simulation of fibre suspens-ion, 15th Annual Meeting The
Polymer Processing Society, s Hertogenenbosch, 109-109
Fiford RJ, Bilston LE, Lu J, Waite P
(1999) An in vivo spinal cord injury model producing vertebral dislocation, Annual
Scientific Meeting Neurosurgical Society of Australasia, Hamilton Island, Qld, 40-40
Keentok MV (1999) Rheometry of
lubricating grease, Regional Grease Conference, Sydney
Powell AM, Bilston LE (1999) Simulation
of whiplash injury an investigation into the role of the facet joints, Proc.
1999 Australian MADYMO users Meeting, Melbourne
Xue S, Tanner RI, Phan-Thien N (1999)
Fully three-dimensional numerical simulations of vortex breakdown in confined swirling
flows of dilute flexible polymer solution, XI Int. Workshop on Numerical Methods for
Viscoelastic Flows, Vaals, The Netherlands, 20-20
Avagliano AJ, Phan-Thien N (1999)
Torsional flow stability of highly dilute polymer solutions, J Non-Newt. Fluid Mech., 84,
19-44
Dou H,
Phan-Thien N (1999) The flow of an Oldroyd-B fluid past a cylinder in a channel: adaptive viscosity vorticity (DAVSS-w)
formulation, J. Non-Newt. Fluid Mech., 87, 47-73
Fang Z,
Phan-Thien N (1999) A particle suspension model: An
unstructured finite-volume implementation, J Non-Newt. Fluid Mech., 80,
135-153
Fan X,
Phan-Thien N, *Zheng R (1999) Simulation of fibre suspension flows by the Brownian
configuration field method, J. Non-Newt. Fluid Mech.,
84, 257-274
Fan Y,
Tanner RI, Phan-Thien N (1999) Galerkin/least-square finite-element methods for steady
viscoelastic flows, J. Non-Newt. Fluid Mech.
84, 233-256
Jabbarzadeh-Khoei
A, Atkinson JD, Tanner RI (1999) Wall slip in the molecular dynamics simulation of thin
films of hexadecane, J Chem. Phys., 110,
2612-2620
Keentok
MV, Xue S (1999) Edge fracture in cone-plate and parallel plate flows, Rheol. Acta., 38,
321-348
Phan-Thien
N, Fan X, *Khoo B-C (1999) A new constitutive model for monodispersed suspensions of
spheres at high concentrations, Rheol. Acta., 38,
297-304
Phan-Thien
N, Fan X (1999) Pressure drop created by a sphere setting in a tube containing a fibre
suspension, J. Rheol.,
43, 257-274
Phan-Thien
N, Dou H (1999) Viscoelastic flow past a cylinder: Drag
coefficient, Computer Methods in Appl. Mech. and
Engn., 180,
243-266
*Sakurai
R, See HT, *Saito T, *Sumita M (1999) Effect of matrix viscoelasticity on the
electrorheological properties of particle suspensions, J. Non-Newt. Fluid Mech., 81,
235-250
*Sakurai
R, See HT, *Saito T, *Asai S, *Sumita M (1999) Suspension of layered particles: A topimum electrorheological fluid for d.c.
applications, Rheol. Acta,
38, 478-483
See HT
(1999) Advances in modellng the mechanisms and rheology of electrorheological fluids, Korea-Australia Rheology Journal, 11,
169-195
See HT
(1999) Measurement of the viscoelastic properties of bituminous materials using an
oscillating needle technique, Rheol. Acta,
38, 443-450
See HT
*Field J, *Pfister B (1999) The response of electrorheological fluid under oscillatory
squeeze flow, J. Non-Newt. Fluid Mech.,
84, 149-158
Xue S,
Phan-Thien N, Tanner RI (1999) Fully three-dimensional, time-dependent numerical
simulations of Newtonian and viscoelastic swirling flows in a confined cylinder. Part 1. Method and steady flows, J. Non-Newt. Fluid Mech., 87,
337-367
Xue S,
Tanner RI, Phan-Thien, N (1999) Three-dimensional numerical simulations of viscoelastic
flows predictability and accuracy, Computer Methods in Appl.
Mech. and Engn., 180, 305-331
*Zheng R,
*Kennedy P, Phan-Thien N, Fan X (1999) Thermoviscoelastic simulation of thermally and
pressure-induced stresses in injection moulding for the prediction of shrinkage and
warpage for fibre-reinforced thermoplastics, J. Non-Newt. Fluid Mech., 84,
159-190
Keentok MV
(1999) Science history, The Physicist, 39,
166-167
*Non-University of Sydney author.
**Non-Dept. of Mechanical and
Mechatronic Engn. author
29/5/00